Stealth-RO 150 GPD Membrane

$72.83

  • 98+% PPM Rejection
  • 1 membrane for stealth-RO150 and 2 membranes for the stealth-RO300
  • Filters up to 150 GPD (gallons per day)
  • Replace between 6 months to 2 years

THERE ARE TWO INDICATIONS AS TO WHEN TO CHANGE YOUR MEMBRANES

  1. Test the RO and source/inlet water to see what percentage of the inlet water’s PPM the Stealth-RO150 is filtering out (rejection %). You should see approximately 98% of the inlet PPMs being removed when the membrane is new. If the rejection % falls under an acceptable level (typically 90%) it’s time to change the membrane
  2. When the flow rate of the product water slows down significantly. This can also happen if your pre-filters are clogged. If you change your pre-filters and the product water still flows slowly then it’s an indication you need a new membrane. When it doubt contact HydroLogic

Flow rates of RO systems are based on source water @ 65 psi / 77° / 500 ppm

Out of stock

SKU: 10989 Category:
Hydrologic

Description

Stealth-RO – 150 GPD Membrane For Stealth-RO150 & Stealth-RO30

Brand

Hydrologic

Hydrologic

Reviews

There are no reviews yet.

Be the first to review “Stealth-RO 150 GPD Membrane”

Your email address will not be published. Required fields are marked *