The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-X.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-X. The DSH modules are rated at 10-amps.

*Use with dehumidifiers less than 7 amps to avoid current overload.

The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-X. The DSH modules are rated at 10-amps.

*Use with dehumidifiers less than 7 amps to avoid current overload.

The Trolmaster DSD-1 Dry-Contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.

The DSD-1 plugs into a standard Nema 120 volt 15/20-amp power outlet to provide operating power to the DSD-1 circuitry. Then the user can use any voltage (up to 240 volts @ 10-amps) to connect their control voltage from their equipment to the common, normally open and/or normally closed contacts on the DSD-1. Almost any device that requires a "dry-contact" or relay to activate will work with the DSD-1.

The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as: • Lighting contactors • Light Deprivation curtains • Pump contactors • Temperature devices • Humidity devices • CO2 devices

*Consult Trolmaster for questions concerning your particular device.

The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-X. Any CO2 device that is 10-amps at 120 volts or less can be controlled by the DSC-1.

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split.

The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module.

The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.

INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (Modules used in “parallel”.)

Examples from above for interlock OFF would be:   - Turn on an exhaust fan to reduce temp or humidity. - Turn on an exhaust fan at night using a recycling timer OR when Humidity is too high

INTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (Modules used in “series”.)

Examples from above for interlock ON would be: - Shut off a CO2 device when an exhaust fan is running - Shut off lights if the temperature gets too warm within the area

The BETA-1 is a simple solution for the Mini Split Air Conditioners.

It uses the remote control that came with your mini split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of mini-split unit can be controlled by the BETA-1. Once the BETA-1 learns the signals from your remote controller, it will automatically change the setpoint on the mini-split to two separate Day and Night temperatures. It does this AUTOMATICALLY by using a small IR (infrared) emitter/sending unit that will send the same signal to the mini-split, as the remote control would normally send.

The BETA-2 can control variable-speed fans by using the current temperature to increase or decrease the fan speed. By increasing the fan speed, cooling is increased… decreasing fan speed will reduce cooling capacity. Using the BETA-2 in this way provides a VERY economical and efficient way of dealing with heat within an enclosed space.

The BETA-8 CO2 controller offers a precision CO2 NDIR sensor/controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems. The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years.

The BETA-6 features a precision humidity sensor within a 16ft remote probe assembly. Simply plug in your humidity/dehumidify device to the power outlet on the bottom of the BETA-6. The user can select separate “day / night” humidity settings and the photocell built into the BETA-6 will automatically start controlling your device (Settings from 20-90% rH). Either humidifiers or dehumidifiers can be controlled by the BETA-6.

The BETA-4 is capable of controlling any heating or cooling device that is 10-amps or less. Simply plug in your device to the power outlet on the bottom of the BETA-4.  It uses 3-buttons a digital display and offers separate "day / night” temperature settings and features a built-in photocell.

The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an infrared remote (IR) controller. We use the remote control that comes with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.