Athena Grow is a simple and clean formula designed for the vegetative stage of growth and for non-flowering plants. Our careful balanced mineral ratios help facilitate optimal plant development including photosynthesis, healthy respiration, and robust stalk and root growth.

This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.

Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.

Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.

This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.

Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.

Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.

This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.

Formulas are sediment free and are compatible with all dosing and irrigation systems  including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.

Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.

This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.

Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.

The TS-2 thermostat station is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-X allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled

The TS-1 thermostat station is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-X allows separate Day and Night settings for each of up to (4) TS  modules so multiple HVAC systems can be controlled by a single Hydro-X system.

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or a space for water… as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in this way, the water detector is placed where runoff will accumulate (or where water is being introduced to the growing medium). Each output (solenoid or pump) on the Aqua-X can be “assigned” to a specific WD-1. Every time the solenoid or pump assigned to the WD-1 is activated by the Aqua-X, the WD-1 must detect water within a adjustable delay time. If water is not detected (pump or solenoid failure) the Aqua-X will send out a user alert notifying of the “irrigation failure.” Up to 25 WD-1 can be connected to a single Aqua-X.

The OA6-24 control board is designed to control multiple 24vac solenoid valves.

It provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single Aqua-x providing a maximum of 30 individually controlled outputs to connect to your solenoid valves. The Aqua-X can also provide a “master pump link” by using a DSP-1 along with the OA6-24. Connecting a DSP-1 to the OA6-24 provides an automatic “pump link” between the DSP-1 and the OA6-24. When any of the 24vac irrigation zones are activated on the OA6-24, the DSP-1 will automatically turn on the pump.

The Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Aqua-X is designed to control up to 30 separate irrigation zones (24vac solenoid valves or 120vac pumps),  The Aqua-x monitors pH / EC and water temp as well as to monitor actual growing medium moisture levels by using up to (8) Water Content Sensors connected to a single Aqua-x controller. The timers can be set-up to be recycling timers, or to operate at specific time of day and durations. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.

The NFS-1 is the brain of the Aqua-X system. It comes with a water detector WD-1 for leaking alert and watering confirmation.

The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand.

"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-X to control lights using their low-volt control option.

This LMA-14 lighting adapter is specially designed to control the HIDs like Gavita / Nanolux / Luxx / Growers Choice / Illuminar / PL and LEDs like Fluence / Next Light / Photobio.

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-X to control lights using their low-volt control option.

This Lighting Control Adapter S (LMA-13) is specially designed for controlling SunSystem ballasts (except for SunSystem LEC 630).