Flowering plants require higher amounts of phosphorous (P) and potassium (K) to increase flower bulk and support high-metabolic activities. Athena Pro Bloom contributes balanced levels macro and micro-elements including sulfur (S) used for increasing potency and flavors.

• Balanced NPK and essential microelements (when used with Pro Core)
• Fully soluble dry fertilizer, no particulates or sediment
• Works with any dosing system: Dosatron, Netaflex, Rhythm
• Mixes completely at room temperature
• Low heavy metal content

01WPCJL4N-B

• 98+% PPM Rejection
• 1 membrane for stealth-RO150 and 2 membranes for the stealth-RO300
• Filters up to 150 GPD (gallons per day)
• Replace between 6 months to 2 years

THERE ARE TWO INDICATIONS AS TO WHEN TO CHANGE YOUR MEMBRANES

1. Test the RO and source/inlet water to see what percentage of the inlet water’s PPM the Stealth-RO150 is filtering out (rejection %). You should see approximately 98% of the inlet PPMs being removed when the membrane is new. If the rejection % falls under an acceptable level (typically 90%) it’s time to change the membrane
2. When the flow rate of the product water slows down significantly. This can also happen if your pre-filters are clogged. If you change your pre-filters and the product water still flows slowly then it’s an indication you need a new membrane. When it doubt contact HydroLogic

Flow rates of RO systems are based on source water @ 65 psi / 77° / 500 ppm

The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers.

The TS-2 thermostat station is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-X allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled

1″ ID Black Tubing 100′

Athena Pro Grow 25lb Bucket

Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.

We discourage mixing Pro Line in small amounts directly into the reservoir.  We would rather turn the Pro line into a concentrated liquid first  and then use that liquid to mix your batch tanks.

Nutrient Preparation Steps for a STOCK CONCENTRATE:

1. Get a measuring container that has accurate gallon marks on it.
2. Fill half of the stock tank with water.
3. Slowly pour granules into water while agitating, then mix thoroughly to solubilize.
4. Add additional water until it gets exactly to the 12.5 gallon mark.
5. Vigorously mix until all granules are solubilized.

Mix your BATCH RESERVOIR: Using the recommended 2 lb per gallon chart determine the ml per gallon to achieve your desired EC.

Ingredients Potassium Phosphate, Potassium Sulfate, Magnesium Sulfate, Iron DTPA

Athena Pro Bloom 25lb Bucket

Athena Pro Balance 25lb Box

Available in white or black with a square grid pattern, ID trays are formed with deep sidewalls to accommodate larger root masses, taller pots, and deeper saturation. Unique rounded drainage channels simplify cleaning, while gusseted corners allow for greater support. All Botanicare trays are made in the USA using renewable solar energy with at least 80% recycled materials. White trays are wrapped in virgin plastic which resists U.V. degradation and staining.

The BETA-1 is a simple solution for the Mini Split Air Conditioners.

It uses the remote control that came with your mini split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of mini-split unit can be controlled by the BETA-1. Once the BETA-1 learns the signals from your remote controller, it will automatically change the setpoint on the mini-split to two separate Day and Night temperatures. It does this AUTOMATICALLY by using a small IR (infrared) emitter/sending unit that will send the same signal to the mini-split, as the remote control would normally send.