The ECS-6 extension cable is simply a 16ft extension cable to use with the WCS-1 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.

The OA6-24 control board is designed to control multiple 24vac solenoid valves.

It provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single Aqua-x providing a maximum of 30 individually controlled outputs to connect to your solenoid valves. The Aqua-X can also provide a “master pump link” by using a DSP-1 along with the OA6-24. Connecting a DSP-1 to the OA6-24 provides an automatic “pump link” between the DSP-1 and the OA6-24. When any of the 24vac irrigation zones are activated on the OA6-24, the DSP-1 will automatically turn on the pump.

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-X. The PPH-2 probe is a commercially rated probe and it connects to the Aqua-X via the AMP-2 Sensor Board. It is intended to be used inline with existing pvc piping and also can be placed into an water tank.

The Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Aqua-X is designed to control up to 30 separate irrigation zones (24vac solenoid valves or 120vac pumps),  The Aqua-x monitors pH / EC and water temp as well as to monitor actual growing medium moisture levels by using up to (8) Water Content Sensors connected to a single Aqua-x controller. The timers can be set-up to be recycling timers, or to operate at specific time of day and durations. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.

The NFS-1 is the brain of the Aqua-X system. It comes with a water detector WD-1 for leaking alert and watering confirmation.

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or a space for water… as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in this way, the water detector is placed where runoff will accumulate (or where water is being introduced to the growing medium). Each output (solenoid or pump) on the Aqua-X can be “assigned” to a specific WD-1. Every time the solenoid or pump assigned to the WD-1 is activated by the Aqua-X, the WD-1 must detect water within a adjustable delay time. If water is not detected (pump or solenoid failure) the Aqua-X will send out a user alert notifying of the “irrigation failure.” Up to 25 WD-1 can be connected to a single Aqua-X.

The BETA-8 CO2 controller offers a precision CO2 NDIR sensor/controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems. The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years.

The BETA-2 can control variable-speed fans by using the current temperature to increase or decrease the fan speed. By increasing the fan speed, cooling is increased… decreasing fan speed will reduce cooling capacity. Using the BETA-2 in this way provides a VERY economical and efficient way of dealing with heat within an enclosed space.

The BETA-6 features a precision humidity sensor within a 16ft remote probe assembly. Simply plug in your humidity/dehumidify device to the power outlet on the bottom of the BETA-6. The user can select separate “day / night” humidity settings and the photocell built into the BETA-6 will automatically start controlling your device (Settings from 20-90% rH). Either humidifiers or dehumidifiers can be controlled by the BETA-6.

The BETA-1 is a simple solution for the Mini Split Air Conditioners.

It uses the remote control that came with your mini split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of mini-split unit can be controlled by the BETA-1. Once the BETA-1 learns the signals from your remote controller, it will automatically change the setpoint on the mini-split to two separate Day and Night temperatures. It does this AUTOMATICALLY by using a small IR (infrared) emitter/sending unit that will send the same signal to the mini-split, as the remote control would normally send.

The BETA-4 is capable of controlling any heating or cooling device that is 10-amps or less. Simply plug in your device to the power outlet on the bottom of the BETA-4.  It uses 3-buttons a digital display and offers separate "day / night” temperature settings and features a built-in photocell.

The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-X. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240VAC). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.

*This plug is NOT U.L. or E.T.L listed

The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an infrared remote (IR) controller. We use the remote control that comes with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.